Tablet Press

Salient Features

1. Tablet Press Mark II is a high speed Rotary tablet press for higher table output, suitable for large batch production.
2. Machine is having a square design with total consideration of GMP standards.
3. All the tablet parameters can be fine tuned during the operation of the machine from outside the tableting zone.
4. The machine is having elegantly designed cabinet top of SS-304.
5. The machine is having round hoppers of SS-304 with Butterfly valve.
6. The machine is having A.C. variable frequency drive for the main motor.
7. Machine is also having A.C. variable frequency drive for force feeding motors, which enables operators to synchronize machine's speed & feed both.
8. The machine is having Electromagnetic clutch arrangements.
9. The machine is having one piece turret of special grade casting. However, three piece turret with SS-304/SS-316 middle plate is also available (optionally). Electro less nickel plating can also be available to the turret, (optionally).
10. Lower punch seals are provided at lower punch hole in turret.

Technical Specification

Models	RDIID-37	RDIIB-45	RDIIBB-55	RDIIBB-61
Tooling	D	B	BB	BB
No . Of Stations	37	45	55	61
Max . Output(Tab/hr)	222,000	324,000	395,000	438,000
Max . Operating Pressure(Main)	100 kN	65 kN	65 kN	65 kN
Max . Tablet Dia	25 mm	17.5 mm	17.5 mm	17.5 mm
Max . Depth of Fill	20.5 mm	15.9 mm	11.1 mm	11.1 mm
Upp.Punch Penetration	3.2 to 8 mm	3.2 to 8 mm	3.2 to 8 mm	3.2 to 8 mm
Main Motor	6 HP/ 1440 RPM / 3 PHASE / A.C.
Force Feeder Motor	0.25 HP/2800 RPM/ 3 PHASE / A.C.
Total Power	9.5 HP / 3 PHASE / A.C.
Overall Dimensions	148 x 141 x 188(H)(Cms.) Approx.
Net Weight	2250 Kgs.